Plastic – coated Types (9P Types)

	Maximum Ratings			Characteristics E (at 25℃)
	Applied	Allowable	Ambient	Cell Resistance A						Response Time at 10 lx D
	Voltage	Power	Temperature	10 lx (at 2856K)			0 lx B	C
Type No.	at 25℃	Dissipation	Ta	Min.	Max.		Min.	100~10 lx		Rise Time		Decay Time
		at 25℃		(K	(K	(M			Type		Type		Type
	(Vdc)	(mW)	(℃)	ohm)	ohm)	ohm)					(ms)		(ms)
9001	150	90	-30~+75	4	11	0.3			0.65		60		25
9002	150	90	-30~+75	9	20	0.5			0.6		60		25
9002-1	150	90	-30~+75	11	27	0.5			0.7		60		25
9003	150	90	-30~+75	16	33	1			0.8		60		25
9003-1	150	90	-30~+75	23	33	1			0.85		60		25
9004	150	90	-30~+75	27	60	2			0.85		60		25
9005	150	90	-30~+75	50	94	2.5			0.9		60		25
9005-1	150	90	-30~+75	48	140	20			0.9		60		25
9006	150	90	-30~+75	80	200	5			1		60		25
9007	150	90	-30~+75	10	100	1			0.8		60		25
9008	150	90	-30~+75	10	200	20			0.85		60		25
9103	150	90	-30~+75	20	45	1			0.8		60		25
9200	150	90	-30~+75	10	50	5			0.9		70		15
9203	150	90	-30~+75	5	20	20			0.9		70		15

 

 

 

A. Measured with the light source of a tungsten lamp operated at a color temperature of 2856K.

B. Measured 10 seconds after removal of incident illuminant of 10 lux.

C. Gamma characteristic between 10 lux and 100 lux and given by

                       

Where R100, R10: cell resistances at 100 lux and 10 lux respectively

E100, E10: illuminant of 100 lux and 10 lux respectively

D. The rise time is the time required for the cell conductance to rise to 63% of the saturated level. The decay time is the time required for the cell conductance to decay from the saturated level to 37%.

E. All character is tics are measured with the light history conditions: the CdS cell is exposed to light (100 to 500 lux) for one to two hours.

 

Home    About Aicl    Content    Thermistor     LEDs    E-mail

Allguy International Co., Ltd.

3F, No.18, Lane 609, Sec 5, Chung Sin Road, ShanChung City, Taipei Hsien, Taiwan

Tel：886-2-22782226  FAX：886-2- 22783558